Showing posts with label Lighting Effects. Show all posts
Showing posts with label Lighting Effects. Show all posts
Tuesday, February 18, 2014
Getting Lit-up Storm Talon Edition
Monday, October 28, 2013
Getting Lit-Up (Land Raider Edition)
Shortly after getting my illuminated Storm Raven done,
I started building my Space Wolves Land Raider with
the cool Forge World doors. Shortly after starting it though, I decided that I wanted it to be lit up as well. Whereas with the Raven it was easy to hide the batteries in the flying base, the Land Raider was harder to deal with.
While it would be easy enough to hide a battery pack in the hold of a Land Raider, I had painted the interior of mine so I would be lighting the interior; a big old battery pack sitting on the floor would be pretty ugly. I found these battery holders on e-bay:
Each one holds 2 CR 2032's which provides 6.5 Volts or so -- perfect for my uses. Now where to mount it? I need the batteries to be accessible so they could be removed/changed without too much fuss. Ultimately, I decided to hollow out a space on the underside just enough so that the tank would be resting on its treads not on the battery pack.
I decided to use 4 yellow LED's to light the interior, with 2 on the Mechanicus shrine, one lighting up the control panel opposite the opening side door and one for general lighting. I used perf board to build a small lighting board for the interior lights to keep everything in the right place.
The headlights are four 3mm white LED's. For those who are electronically inclined, I wired the yellow LED's in as 2 series pairs each with a 560 ohm resister, for around a 6 mA current draw for the interior. The headlights are each wired individually with a 1k resister, for around 2 mA each. I should be able to get around 10 hours of battery life.
Here's the installation
And all lit up
And the interior
I started building my Space Wolves Land Raider with
the cool Forge World doors. Shortly after starting it though, I decided that I wanted it to be lit up as well. Whereas with the Raven it was easy to hide the batteries in the flying base, the Land Raider was harder to deal with.
While it would be easy enough to hide a battery pack in the hold of a Land Raider, I had painted the interior of mine so I would be lighting the interior; a big old battery pack sitting on the floor would be pretty ugly. I found these battery holders on e-bay:
Each one holds 2 CR 2032's which provides 6.5 Volts or so -- perfect for my uses. Now where to mount it? I need the batteries to be accessible so they could be removed/changed without too much fuss. Ultimately, I decided to hollow out a space on the underside just enough so that the tank would be resting on its treads not on the battery pack.
I decided to use 4 yellow LED's to light the interior, with 2 on the Mechanicus shrine, one lighting up the control panel opposite the opening side door and one for general lighting. I used perf board to build a small lighting board for the interior lights to keep everything in the right place.
The headlights are four 3mm white LED's. For those who are electronically inclined, I wired the yellow LED's in as 2 series pairs each with a 560 ohm resister, for around a 6 mA current draw for the interior. The headlights are each wired individually with a 1k resister, for around 2 mA each. I should be able to get around 10 hours of battery life.
Here's the installation
And all lit up
And the interior
Labels:
Conversion,
Lighting Effects,
Space Wolves,
Warhammer 40K
Wednesday, August 29, 2012
Stretched Stormraven Part 2
My first thought was to use parts of the crashed Aquila Lander from the old Battle for Macragge starter set; ultimately I couldn't fit the 3 AAA battery pack under any of the bits in a way that would fit on the base. Looking around, I found a disused Leman Russ hull that had once been a Looted Wagon in my son's Ork army -- perfect.
Here's the boring electrical stuff -- the red LED helps in debugging the connection to the model as it can be a bit finicky.
I opened up most of the bottom of the hull and expanded the turret ring hole slightly to allow the flying stand to fit throught. The bottom of the clear flying stand ended up getting slimmed down a bit to allow the batteries to fit. The Russ itself I decided to decorate as a Traitor Guard tank using some Chaos sigils etc
Here's how it looks all painted up
And the Stormraven itself:
And of course the reason for the base, the lights
Labels:
Conversion,
Grey Knights,
Lighting Effects,
Storm Raven,
Warhammer 40K
Friday, August 17, 2012
Stretched Stormraven Part 1
The biggest problem that I have with the Stormraven is that it's too short -- it's supposed to have the same troop capacity as the Land Raider but clearly the troop compartment is smaller.
To make the troop compartment large enough means lengthening it by about 1.5 inches to my eyes. I decided to take the same approach as Chapterhouse by adding the length to the rear of the hull. Why not just go with Chapterhouse's conversion kit? Well, they extend the hull a bit too much to my eyes, about 2.5 inches.
I made the template for the hull side extensions by tracing the rear of the hull outline, shifting 1.5 inches and tracing again. The result is here:
The side extensions are then fit in nicely. The floor extension is a simple 2"x1.5" rectangle, I added tread plate to match the look of the stock floor.
Even though it will be difficult to see, I painted all of the interior bits prior to assembling the hull.
I'm not a huge fan of the "T" tail look, so I cut the tail and flipped it, so that the stabilizer is swept back and in the anhedral position.
An extra feature that I decided to add to this project was lights -- 4 white LED's for the headlights, 2 blue LED's to light the cockpit and turret, and two red LED's to light the cargo hold. The panel lights create an interesting study in object source lighting.
The battery pack will be mounted on the base with silver buss wire running up the flying stand. The socket for the stand will provide the contact point for the battery power.
Here's a shot showing the headlights, pilot console lights and the interior red lights illuminated. Completing the model now is largely a matter of final assembly and painting. The last really big challenge is building terrain on the base to hide the battery pack while still allowing for removal to change the batteries.
To make the troop compartment large enough means lengthening it by about 1.5 inches to my eyes. I decided to take the same approach as Chapterhouse by adding the length to the rear of the hull. Why not just go with Chapterhouse's conversion kit? Well, they extend the hull a bit too much to my eyes, about 2.5 inches.
I made the template for the hull side extensions by tracing the rear of the hull outline, shifting 1.5 inches and tracing again. The result is here:
The side extensions are then fit in nicely. The floor extension is a simple 2"x1.5" rectangle, I added tread plate to match the look of the stock floor.
Even though it will be difficult to see, I painted all of the interior bits prior to assembling the hull.
I'm not a huge fan of the "T" tail look, so I cut the tail and flipped it, so that the stabilizer is swept back and in the anhedral position.
An extra feature that I decided to add to this project was lights -- 4 white LED's for the headlights, 2 blue LED's to light the cockpit and turret, and two red LED's to light the cargo hold. The panel lights create an interesting study in object source lighting.
The battery pack will be mounted on the base with silver buss wire running up the flying stand. The socket for the stand will provide the contact point for the battery power.
Here's a shot showing the headlights, pilot console lights and the interior red lights illuminated. Completing the model now is largely a matter of final assembly and painting. The last really big challenge is building terrain on the base to hide the battery pack while still allowing for removal to change the batteries.
Labels:
Conversion,
Grey Knights,
Lighting Effects,
Storm Raven,
Warhammer 40K
Subscribe to:
Posts (Atom)



